Over time, grounding problems may occur in audio gears, causing them to not produce the sound properly and making distorted sounds. When purchasing a turntable, you must be aware of what you sign up for, because grounding problems can make you pull your hairs out at certain points. When all chassis connections in many equipment pieces are different than the other voltage or possible ground, a ground loop happens.
Therefore, you should know what to do in such situations to bring your turntable back to its former glory. That being said, if you’re looking forward to improving the sound in the system and get rid of the annoying noises, you should know how to ground a turntable.
Turn Off the Power Related to the Record Player
This is pretty much obvious – if you want to fix the issue of your turntable, it needs to be turned off first. By doing this, you avoid any loud and damaging noises that come out of the speakers while you make the connections.
Moreover, it lowers the already existent risk of electric shock.
Find Out the Grounding Wire
The grounding wire is usually connected to the underside of the metal turntable chassis. It has an unconnected copper spade connector. Although turntable grounding wires are generally green, yours may have a different color, so look out for that. If the turntable is new, then the wire may be folded under the chassis and wrapped with a twist tie. If that’s the case, unwrap it.
Locate the Grounding Terminal on the Receiver or the Amplifier
Look on the receiver or the amplifier to find the grounding terminal. Usually, it is marked with “ground” and can be found on the back of the unit. It may be a metal post with a knurled shaft or a simple screw terminal. You should loosen the grounding terminal.
Connect the Grounding Wire to the Amplifier’s Grounding Terminal
You should ensure that the grounding wire is able to reach the amplifier’s grounding terminal. Then, make sure to move the equipment to reduce the distance between the amplifier and the turntable if that’s needed.
Drop the Ground Wire with the Spade Connector to the Grounding Terminal
The 5th step requires you to slip the ground wire spade connector onto the grounding terminal. Afterward, what you need to do is tighten the connection with moderate force, because you shouldn’t tighten it too much either.
Turn on the Amplifier and Turntable
Now that you’ve gone through all of these steps, you can simply turn on the amplifier and the turntable, and you’re good to go. The system is ready to serve you.
Turntables can just stop functioning properly over time, and you need to do something to fix the annoying sound they produce. Whether it’s turntable stylus cleaning or grounding that it needs, you should consider it if you want to listen to music at the highest quality.